intelligent controllers from China manufacturer - Ningbo Zhongce Electronics Co.,Ltd.

Payment Terms:	T/T,L/C,D/A,D/P,WU
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: DF-SUN SC 40A

Production Capacity: 1000 Piece/Pieces per Month

Delivery Date: 20 days after advance payme...

Weight: 0.4Kg

Storage temperature: -20°C to 50°C

Means of Transport: Ocean

Packing: standard export packing

Size: 165mm*102mm*40mm

Operating temperature: -20°C to 40°C

1.program timer
2.recognized 12v/24v
3.intelligent controller

PWM solar charger/intelligent controller

There are 3 LED indicators and 1 figure LED indicator, 1 button, and 6 terminals covered with the cover.

The first LED indicates the sunshine, when the solar panel connected with the charger is lighted by the Sun, this indicator will be on, otherwise it will be off. The second LED indicates the volume of the battery, when the battery is full, the indicator is green, when the battery is lower, the indicator is red, when the battery is empty, then the indicator will be flashing slowly with red color and auto cut off the load. The third LED indicates load, when it is on, the DC output for the load is on, and if it is off, there is no DC output.

The figure LED indicates the work model of the charger, the setting time or delay time of the charger.

Specification

DF-SUN SC40A1224 ( 12V/24V Battery Auto Sensing)

Rated Cable Charging Current	40A
Rated Load Current	40A
System Voltage	12V	24V
Overload, Short Circuit Protection	YES
No load current	≤20 mA
Charging Circuit Voltage Drop	Not more than 0.26V
Discharging Circuit Voltage Drop	Not more than 0.15V
DC Charge Voltage	14.4V	28.8V
Float Charging	13.7V	27.4V
Temperature Compensation	-5mv/℃/2V
Automatic Disconnection Output Voltage	10.5V	21V
Control Method	Charge for the PWM pulse width modulation, the control point voltage for different discharge rates of intelligent compensation amendment;

Mechanics

Size: 165mm*102mm*40mm

G.W.: 0.4Kg

Environmental conditions

Operating temperature -20°C to 40°C

Storage temperature -20°C to 50°C

Application

Connecting the solar panel to the solar panel terminals of the charger, "+" to "+" and "-" to “-“.

Connecting the battery to the battery terminals of the charger,““+" to “+" and “-“ to “-“.

Connecting the DC load to the load terminals of the charge, take care of the “+” and “-“ of the DC output.

If the panel is charging the battery, the solar panel LED indicator will be on, and the battery volume LED indicator will display the volume of the battery with different color, from red to green.

Press the power button, will control the DC output ON or Off.

Pressing the power button for about 3 seconds, the figure LED will display “0”, then you release this button, it indicates that the charger enters the timer setup state, at this state, every press of the power button will make the digital change from “0” to “F”, every figure indicates the timer of the load, for example, if you change the digital as “3”, then the charge will switch on the DC output and will auto switch off the DC output in 3 hours. About all figures, see the table 1.

Table 1, DC Output Time Setting

Digital	0	1	2	3	4	5	6	7
Timer(hour)	no	1	2	3	4	5	6	7
Digital	8	9	A	b	C	d	E	F
Timer(hour)	8	9	10	11	12	13	14	15

Pressing the power button for about 6 second, the figure LED will display “0.”, then you release this button, it indicates that the charger enters the delay time setup state, at this state, every press of the power button will make the digital change from “0.” to “F.” to”-.“, every figure indicates the delay time of the load, for example, if you change the digital as “3.”, then the charge will switch on the DC output when the night is coming and it will auto switch off the DC output in 3 hours. When the charger is at the light controlling state, the “.” will be display at the figure LED. If you don't want the light control function, just reset the delay timer to digital “-.”, when the figure is “0.”, the DC output is light controlled, but no delay time. About all figures, see the table 2.

Table 2, Delay Time Setting

Digital	0.	1.	2.	3.	4.	5.	6.	7.	8.
Delay Timer(hour)	On at night Off at day	1	2	3	4	5	6	7	8
Digital	9.	A.	b.	C.	d.	E.	F.	-.
Timer(hour)	9	10	11	12	13	14	15	Disable light control function

Solar Charge Controller User Manual

PWM Control Charger

Adjustable Loading Timer

Adjustable Light On + Delay Off Timer

12V and 24V Battery Auto sensing

Preface

Solar Charge Controller is battery charger that can charge batteries by the power from the solar panels. The charge controller is intelligent for charging batteries, using MCU and professional software to control the step of charging, can prolong the batteries' life.

It has full self protection, protection of overload, short circuit, reverse connection, over charging and over discharging etc.

This model controller is 12V/24 Battery Auto-Sensing.

When the Battery is connected to the Charge controller, the controller will detect the voltage of the battery first, then it will decide how to charge the battery connected.