Grid Tie Wind Power Inverter from China manufacturer - Ningbo Zhongce Electronics Co.,Ltd.

Payment Terms:	T/T,L/C,WU
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: DF-SUN 500GWL

Packing: standard export packing

Output Type: Multiple

Brand Name: DF-SUN

Weight: 4.0Kg

Output Voltage: 110V/120V, 90V ~ 130V

Grid-Tie: Inverter

Means of Transport: Ocean

Type: DC/AC Inverters

Output Power: 401 - 500W

Size: 332mm*265mm*135mm

Input Voltage: 22V~60V

Pure Sine wave: Wind Turbine

Build In Rectifier
Build In Dump Load Controller
Build In High Wind Protection

Turbine Grid Tie Wind Power Inverter,Build In Rectifier, Dump Load Controller and High Wind Protection.

Preface

The Wind Turbine Grid Tie Inverter can transfer wind energy from wind generators directly into the home grid using no extra equipment. It can be connected to any outlet (conventional network) in the home. The grid-tie inverter controls the phase and the frequency and voltage of the power generated by the wind generator. It produces a pure sine-wave and matches that of the grid.

This model grid-tie has build in bridge rectifier and dump load controller, it can maintain the rotating speed of the wind turbine and keep the voltage from the wind turbine always at the range of the rated range of the grid tie inverter. It also has a high voltage protection function, when the wind is too big, and the dump load controlling system can't keep the output voltage from the wind turbine, the controller will disconnect itself from the wind turbine, so it is very safe to be used.

Layout

There are 5 terminals on the left side of the inverter, 3 red terminals will be connected to the three phase output from the wind turbine, and 2 black terminals will be connected to dump load resistors.

There are 4 LED indicators, 3 green indicators and 1 red indicator, 3 green LED indicators will start to cycle from left to right when the grid and AC input supply is detected. This indicates the inverter is operating under normal condition. The rate of the cycling is according to how much power is being output from the wind turbine. The bigger the output power is, the faster the rate is. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called "Island Protection".

Electrical Specifications:

Model		DF-SUN 500GWL
Normal AC Output Power		450W
Maximum AC Output Power		500W
ACOutputVoltage Range	110V/120V	90V ~ 130V
AC OutputFrequency Range		46Hz ~ 65Hz
Total Harmonic Distortion(THD)		<5%
Power Factor		0.99
AC InputVoltage Range (the test point is at the output of therectifier)		22V~60V
Peak Inverter Efficiency		92%
Standby Power consumption		<1.5W
Output Current Waveform		Pure Sine-wave
MPPT Function		Yes
Over Current Protection		Yes
Over Temperature Protection		Yes
Reverse Polarity Protection		Yes
Island Protection		Yes
Stackable		Yes